Test Running Note of Scraper Conveyors (I)

PK Machinery offers horizontal scraper conveyors and inclined scraper conveyors, the angle can range from 0 degree to 90 degrees. Scraper conveyors are widely used for transporting cement , coal, metallurgy, mining, construction material, chemical, grain etc. There are two stages of test running : no-load and load test running. Here PK Machinery will introduce it in details:

Non-load test running
1.Check if there is any remaining tool, iron casting pieces and other hard objects inside the scraper conveyor, if any , please clear up. 
2.Give enough lubrication to all the bearings, driving devices and drive chain etc. 
3.Check if all the scraper conveyor parts are intact, whether the tense of scrapers is suitable or not. 
4.After finish checking the above items, then power on and switch off several times to see if the operation is normal, if normal, run the scraper conveyor continuously.
5. In addition, the head, tail , medium parts and other main structures, workers must be sent to observe the running , if any problems, please solve it without delay.